Soffa Magazine

soffa magazine

How To Clean The Bissell Carpet Cleaner

Bissell carpet cleaners are great tools for keeping your carpets fresh and spotless. But to get the best performance from your cleaner, you need to clean it regularly and properly.

In this article, we will show you how to clean different types of Bissell carpet cleaners, including upright, portable and canister models. We will also give you some tips on how to maintain your cleaner and avoid common problems.

Cleaning an Upright Carpet Cleaner

An upright carpet cleaner is a powerful device that can deep clean your carpets and remove tough stains. But to keep it working well, you need to clean it after each use. Here are the steps to clean your Bissell upright carpet cleaner:

Clean the nozzle:

The nozzle is the part that sprays and sucks up the cleaning solution from your carpet. To clean it, turn off and unplug the machine. Remove the nozzle by pulling it forward and lifting it up. Rinse it under running water and remove any dirt or hair. Wipe it dry with a cloth and reattach it to the machine.

Clean the brush roll:

The brushroll is the part that agitates your carpet and loosens the dirt. To clean it, turn off and unplug the machine. Remove the brushroll cover by unscrewing the two screws on each side. Pull out the brush roll and remove any hair or debris. Rinse it under running water and let it air dry completely before putting it back. Replace the brush roll cover and tighten the screws.

Clean the dirty water tank:

The dirty water tank is where the dirty solution from your carpet is collected. To clean it, turn off and unplug the machine. Remove the tank by lifting it up and out of the machine. Empty the tank into a sink or toilet. Rinse it with hot water and wipe it with a cloth. You can also use a mild detergent or vinegar to disinfect it. Make sure to rinse it thoroughly and let it air dry completely before putting it back.

Clean the filters:

The filters are what keep the dirt and dust from entering the motor and damaging your machine. There are two filters in your Bissell upright carpet cleaner: one in the dirty water tank and one in the base of the machine. To clean them, turn off and unplug the machine. Remove the dirty water tank and take out the filter from inside. Rinse it under running water and squeeze out the excess water. Let it air dry completely before putting it back. To clean the filter in the base, remove the filter cover by pressing down on the tab and pulling it out. Take out the filter and rinse it under running water. Let it air dry completely before putting it back.

Cleaning a Portable Carpet Cleaner

A portable carpet cleaner is a handy device that can spot-clean your carpets and upholstery. But to keep it working well, you need to clean it after each use. Here are the steps to clean your Bissell portable carpet cleaner:

Clean the hose:

The hose is the part that delivers and extracts the cleaning solution from your carpet or upholstery. To clean it, fill a bowl with clean water. Turn on your machine and suction up the water through the hose. Repeat until the water is clear.

Clean the tool:

The tool is the part that attaches to the hose and has a brush or a nozzle. To clean it, rinse it under running water and remove any dirt or hair. Wipe it dry with a cloth.

Clean the tanks:

The tanks are where the clean and dirty water is stored. To clean them, turn off and unplug the machine. Remove the tanks by lifting them up and out of the machine. Empty and rinse them with hot water. You can also use a mild detergent or vinegar to disinfect them. Make sure to rinse them thoroughly and let them air dry completely before putting them back.

Clean the filter:

The filter is what keeps the dirt and dust from entering the motor and damaging your machine. It is located inside the dirty water tank. To clean it, turn off and unplug the machine. Remove the dirty water tank and take out the filter from inside. Rinse it under running water and squeeze out the excess water. Let it air dry completely before putting it back.

Cleaning Carpet Cleaner Attachments

Your Bissell carpet cleaner may come with various attachments that can help you clean different surfaces, such as stairs, upholstery, or hard floors. To keep these attachments in good shape, you need to clean them regularly as well. Here are some tips to clean your Bissell carpet cleaner attachments:

Clean the brush roll:

The brush roll is the part that spins and agitates the carpet fibers. To clean it, turn off and unplug the machine. Remove the power floor head from the extension wand by pulling gently on the green locking ring. Then, remove the brush roll by pressing the release button and pulling it out. Rinse it under running water and remove any hair or debris. Let it air dry completely before putting it back.

Clean the nozzle:

The nozzle is the part that sprays and sucks up the cleaning solution. To clean it, turn off and unplug the machine. Remove the nozzle from the tool by pressing the release button and pulling it out. Rinse it under running water and use a soft brush or cloth to remove any dirt or residue. Let it air dry completely before putting it back.

Clean the tools:

The tools are the parts that attach to the hose and have different functions, such as a crevice tool, a dusting brush, or a pet stain eraser. To clean them, rinse them under running water and wipe them dry with a cloth. You can also watch some videos on how to clean specific tools.

By following these tips, you can keep your Bissell carpet cleaner attachments clean and ready for your next cleaning task. If you have any questions or concerns about your attachments, you can refer to your user manual or contact Bissell’s customer service for help.

Conclusion

A Bissell carpet cleaner is a great device that can help you keep your carpets and upholstery clean and fresh. But to maintain its performance and durability, you need to clean it properly after each use.

In this article, we have shown you how to clean the different parts of your Bissell carpet cleaner, such as the hose, the tool, the tanks, the filter, the brush roll, the nozzle, and the tools. By following these simple steps, you can extend the life of your machine and enjoy a cleaner home.

We also recommend that you check your user manual for more specific instructions and tips for your model. And if you need any assistance or support, you can always contact Bissell’s customer service or visit their website for more information. We hope this article has been helpful and informative for you. Happy cleaning!

Leave a Comment

Scroll to Top